|
|
|
|
|
|
EYE BOLTS
Forged Steel Hot Dipped Galvanized
Available In Regular or
Shoulder Pattern
Recommended for straight line pull
Shank
Diameter |
Thread Length (inches) |
Eye Dimensions |
Working Load Limit (Lbs) |
Approx Weight Per 100 (Lbs) |
|
|
I.D. (in) |
O.D. (in) |
||||
| 1/4X2 | 1.5 | .50 | 1.00 | 650 | 6.00 |
| 1/4X4 | 2.5 | .50 | 1.00 | 650 | 13.50 |
| 5/16X2-1/4 | 1.5 | .62 | 1.25 | 1200 | 18.75 |
| 5/16X4-1/4 | 2.5 | .62 | 1.25 | 1200 | 25.00 |
| 3/8X2-1/2 | 1.5 | .75 | 1.50 | 1550 | 24.33 |
| 3/8X4-1/2 | 2.5 | .75 | 1.50 | 1550 | 37.50 |
| 3/8X6 | 2.5 | .75 | 1.50 | 1550 | 43.75 |
| 1/2X3-1/4 | 1.5 | 1.00 | 2.00 | 2600 | 50.00 |
| 1/2X6 | 3.0 | 1.00 | 2.00 | 2600 | 62.50 |
| 1/2X8 | 3.0 | 1.00 | 2.00 | 2600 | 75.00 |
| 1/2X10 | 3.0 | 1.00 | 2.00 | 2600 | 88.00 |
| 1/2X12 | 3.0 | 1.00 | 2.00 | 2600 | 100.00 |
| 5/8X4 | 2.0 | 1.25 | 2.50 | 5200 | 101.25 |
| 5/8X6 | 3.0 | 1.25 | 2.50 | 5200 | 120.00 |
| 5/8X8 | 3.0 | 1.25 | 2.50 | 5200 | 131.00 |
| 5/8X10 | 3.0 | 1.25 | 2.50 | 5200 | 162.50 |
| 5/8X12 | 4.0 | 1.25 | 2.50 | 5200 | 175.00 |
| 3/4X4-1/2 | 2.0 | 1.50 | 3.00 | 7200 | 168.60 |
| 3/4X6 | 3.0 | 1.50 | 3.00 | 7200 | 184.50 |
| 3/4X8 | 3.0 | 1.50 | 3.00 | 7200 | 200.00 |
| 3/4X10 | 3.0 | 1.50 | 3.00 | 7200 | 237.50 |
| 3/4X12 | 4.0 | 1.50 | 3.00 | 7200 | 251.94 |
| 3/4X15 | 5.0 | 1..50 | 3.00 | 7200 | 300.00 |
| 7/8X5 | 2.5 | 1.75 | 3.50 | 10600 | 275.00 |
| 7/8X8 | 4.0 | 1.75 | 3.50 | 10600 | 325.00 |
| 7/8X12 | 4.0 | 1.75 | 3.50 | 10600 | 400.00 |
| 1X6 | 3.0 | 2.00 | 4.00 | 13300 | 425.00 |
| 1X9 | 4.0 | 2.00 | 4.00 | 13300 | 452.00 |
| 1X12 | 4.0 | 2.00 | 4.00 | 13300 | 550.00 |
| 1X18 | 7.0 | 2.00 | 4.00 | 13300 | 650.00 |
| 1-1/4X8 | 4.0 | 2.50 | 5.00 | 21000 | 750.00 |
| 1-1/4X12 | 4.0 | 2.50 | 5.00 | 21000 | 900.00 |
| 1-1/4X20 | 6.0 | 2.50 | 5.00 | 21000 | 1210.00 |
|
* Ultimate Load is 5 times the Working Load Limit |
|||||
